深圳市比斯特科技材料有限公司
主營產品: 門控五金自動門特種門, 提供專業的解決方案, 全面的工程服務
比斯特廠家直銷美標鎖芯-安全門鎖芯-消防門鎖芯
價格
訂貨量(件)
¥98.00
≥2
店鋪主推品 熱銷潛力款
㠗㠙㠓㠙㠖㠗㠖㠖㠘㠛㠚
在線客服
深圳市比斯特科技材料有限公司
店齡5年 企業認證
聯系人
吳小姐
聯系電話
㠗㠙㠓㠙㠖㠗㠖㠖㠘㠛㠚
所在地區
廣東省深圳市
主營產品
美標鎖芯
美標插芯鎖體系列
高級商用美標插芯鎖五金系統ANSI COMMERCIAL MORTISE LOCK HARDWARE
美標鎖芯 CYLINDER
可替換鎖芯為高安保鎖芯,適用于高安保公共場所
可選尺寸: 1-1/8", 1-3/8".1-1/2”,1-5/8",1-3/4", 1-7/8",2"
表面處理: SS、 PVD、AB
可做總鑰匙管理系統,最高6級 管理
Removable core cylinders are designed to give the user the
flxibility to replace the cylinder nechanism by using a controlkey. This will minimize expensive labor and hardware costs for high turnover situations.
L=1-3/8", 1-1/8",1-1/2", 1-5/8", 1-3/4", 1-7/8", 2"
Finish: SS, PVD, AB
optional: master key
美標插芯鎖要求和檢驗方法
ANSI/BHMA A156,13MORTISE LOCK
適用范圍APPLICATION SCOPE
本標準規定了美式插芯鎖性能要求,包括壽命測試,功能測試、安全測試、材料評估測試、表面處理測試及尺寸標準依據該標準,插芯鎖具的性能等級和安全等級分別分為3級。各級別性能要求如下:
This Standard establishes performance requirements for mortise locks and latches, which includes cycle tests, strength tests, operational tests, security tests, material evaluation tests. finish tests and dimensional criteria. Two Classifications of Grades are described in this standard, Operational grade
and Security Grade, The minimum acceptable Grade lever of both is grade 3.The tests and requirements of all grades are as follows
1.轉動旋鈕擰開鎖舌需要的力:
所有級別最大:9lbf-in(1Nm)
Torque to retract dead bolt or torque to retract dead bolt and latch bolt by turn
Requirements Maximum all grades: 9 lbf-in(1 Nm)
2.轉動鑰匙擰開鎖舌需要的力
所有級別最大:9lbf-in(1Nm)
Torque to retract dead bolt or torque to retract dead bolt and latch bolt by key
Requirement maximum. All Grades: 9 lbf-in(1Nm
3.轉動球形把手或者水平把手?jǐn)Q開鎖舌
需要的力:
所有級別最大:
球形把手:9|bf-in(1Nm)
水平把手:28|bf-in(1Nm
入戶帶按鈕的大門鎖
所有級別:9lbf-in(1Nm)
Force or torque to retract latch by knob or lever.
Requirements maximum:
Knob-all grades: 9 lbf-in(1Nm)
Lever-all grades: 28 lbf-in( 1Nm)
Entry handleset thumb piece:
Requirements Maximum All grades: 9 lbf-in( 1Nm)
4.閉門力
所有級別最大4.5lbf(20N
Force to latch door
Requirement Maximum: All grades 4.5 lbf (20N)
5.門鎖閉時斜舌伸出長度
最?。阂患?jí):9/6in。(14.3mm)
二級和三級:8/3in。(9.5mm)。
Minimum projection of auxiliary dead latch to deadlock latch bolt
Requirements minimum Grade 1: 9/6 in (14.3mm), Grade 2 and 3: 8/3 in. (9.5mm)
6.副方舌伸出的長度:
最?。阂患?jí)3/8in(9.5mm
二級和三級:5/16in(79mm)
Minimum projection of auxiliary dead latch to deadlock latch bolt:
Requirements minimum Grade 1: 3/8 in. (9.5mm), Grade 2 and 3: 5/16 in (7. 9mm)
7門彎曲試驗:
所有級別最大:
球形把手:45|bf-in(5Nm)
水平執手:70bfin(8Nm)
按鈕40bf(180N)
平板拉手:65|bf(290N)
Warped door test
Requirements for Maximum all grades
Knob: 45 Ibf-in( 5Nm)
Levers: 70 lbf-in( 8Nm)
Thumb pieces: 40lbf(180N
Paddles: 65Ibf(290N)
8.鎖舌強度:
斜舌強度最小:所有級別:1200|bf(5300N)
方舌強度最?。核屑?jí)別:1350bf(6,000N)
Bolt strenght test:
Requirements:
Latch Bolt minimum: All grades: 1200 Ibf(5, 300N)
Dead Bolt minimum: All grades: 1350 Ibf(6, 000N)
9.軸負重測試
所有級別最小:
球形把手,水平執手位于軸心時:500|bf(2,200N)
水平執手距軸心2in(51mm)時:360lbf(1600N)
按鈕:150lbf(2200N)
距軸心2in(51mm)時:225|bf(1000N
Axial Load Test
Requirements All Grades minimum:
Knobs, levers at the spindle or grips: 500 lbf(2, 200N)
Levers 2 in(51mm)from spindle: 360 lbf( 1600N)
Thumb pieces: 150 lbf(2200N)
Paddles: at the axle: 2 in(51 mm) from the axle: 225 lbf(1000N)
10.垂直負重測試
一級:360|bf(1600N)
二級:250|bf(1100N
三級:150lbf(670N)
Vertical Load Test
Grade 1: 360 lbf(1600N)
Grade2:250|bf(1100N)
Grade 3:150 lbf(670N)
11.門鎖閉時外水平執手扭力測試:
所有級別最小:450lbf-in(50Nm)
Locked Outside Lever Torque Test:
Requirements: All Grades minimum: 450 lbf-in( 50Nm)
12.門未鎖閉時水平執手扭力測試:
所有級別最小:450lbf-in(50Nm)
Unlocked Lever Torque Test
Requirements: Lever Torque minimum: All Grades: 450 lbf-in( 50Nm)
13.門未鎖閉時入戶門鎖負重測試:
所有級別最小:70|bf-in(310Nm)
Unlocked Entry Handle set load Test:
Requirements: Unlocked Entry Handle set minimum: All
Grades: 70 lbf-in(310Nm)
SECUR| TY TEST安全測試
1.球形把手,水平執手或平板拉手沖擊力測試:
一級:75lbf-ft(100J)10次沖擊
二級:75|bf-ft。(100J)5次沖擊
三級:75|bf-ft.(100J)2次沖擊
Knob, Lever or Paddle Impact Test:
Requirements:
Grade 1: 75lbf-ft (100J)10 blows
Grade 2: 75lbf-ft (100J )5 blows
Grade 3: 75lbf-ft (100J)2 blows
2.鎖芯護片及鎖眼扣沖擊力測試:
一級:75lbf-ft(100J)10次沖擊
二級:75lbf-ft(100J)5次沖擊
三級:75lbf-ft。(100J)2次沖擊
Cylinder guard or Escutcheon Impact Test:
Requirements:
Grade 1: 75Ibf-ft (100J)10 blows
Grade 2: 75lbf-ft (100J )5 blows
Grade 3: 75lbf-ft (100J)2 blows
3.鎖芯護片及鎖眼扣拉手測試:
一級:3600lbf-ft.(16,000N)
二級:2500lbf-ft.(11.000N
三級:1000|bf-ft(4,400N)
Cylinder guard or Escutcheon Tension Test:
Requirements:
Grade1:3600lbf-ft.(16,000N
Grade2:2500lbf-ft.(11,000N
Grade3:1000lbf-ft.(4,400N)
4.鎖芯體及鎖芯殼的拉手測試:
一級:3600|bf-ft.(16,000N)
二級:2500|bf-ft.(11.000N)
三級:1000lbf-ft.(4,400N)
Cylinder body or housing tension Test
Requirements:
Grade1:3600|bf-ft.(16,000N
Grade2:2500lbf-ft.(11,000N)
Grade3:1000lbf-ft.(4,400N)
5.鎖閉的球形把手,水平執手,平板拉手測試,球形把手扭力
一級:175|bf-ft.(240Nm)
二級:120lbf-ft.(160Nm)
三級:55lbf-ft.(75Nm
Locked Knob. Lever or Paddle Test
Requirements:
Knobs Torque
Grade 1: 120 lbf-ft (160Nm)
Grade 2: 80 lbf-ft (110Nm)
Grade 3: 35 lbf-ft (47Nm)
水平執手扭力
一級:120lbf-ft.(160Nm)
二級:80lbf;ft.(110Nm)
三級:35|bft.(47Nm)
Lever Torque
Grade 1: 120 lbf-ft (160Nm)
Grade 2: 80 Ibf-ft (110Nm)
Grade 3: 35 lbf-ft (47Nm)
平板拉手扭力
一級:675lbf(3000N)
二級:450|bf(2000N)
三級:225lbf.(1000N)
Paddle force
Grade1:675|bf.(3000N)
Grade 2: 450 lbf(2000N
Grade3:225|bf.(1000N)
6.鎖芯體和鎖芯殼扭力:
一級:120|bf-ft,(160Nm)
二級:80lbf-ft.(110Nm)
三級:35lbf-t(47Nm)
Cylinder body or Housing Torque Test:
Requirements
Grade 1: 120 lbf-ft (160Nm)
Grade 2: 80 lbf-ft (110Nm)
Grade 3: 35 lbf-ft (47Nm)
7.鎖芯護片和鎖眼扣扭力:
一級:120|bf-ft.(160Nm)
二級:80bf-ft.(110Nm)
三級:35|bf-t.(47Nm)
Cylinder Guard or Escutcheon Torque Test:
Requirements
Grade 1: 120 Ibf-ft, (160Nm)
Grade 2: 80 Ibf-ft (110Nm)
Grade 3: 35 Ibf-ft (47Nm)
8.鎖芯頭沖擊力測試
一級:75|bf-ft。(100J)10次沖擊
二級:75|bf-ft.100J)5次沖擊
三級:75lbf-ft。(100J)2次沖擊
Cylinder Face Impact Test:
Requirements
Grade 1: 75 lbf-ft (100J)10 blows
Grade 2: 75 lbf-ft (100J)5 blows
Grade 3: 75 lbf-ft (100J)2 blows
9.方舌或斜舌,或方舌和斜舌舌沖擊測試:
一級:在二緞的基礎上增加兩次150lbf-ft(200J)沖擊
二級:在一的基礎上增加兩次120lbf-ft160J)沖擊
三級:2次120lbf-t(160J)沖擊加上兩次9olb-ft(160J)沖擊
Dead Bolt or Latch Bolt or Dead Bolt and latch Bolt Impact Test Requirements:
Grade 1: Grade 2 requirements plus 2 blows of 150 lbf-ft (200J)
Grade 2: Grade 1 requirements plus 2 blows of 120 Ibf-ft (160J
Grade 3: 2blows of 60 lbf-ft(80J)plus 2 blows of 90 lbf-ft (120J
10.鎖舌壓力測試
所有級別最?。?/span>
斜舌:360|bf(1600N
方舌:600lbf(2700N
Bolt Pressure Test
Requirements: All Grades Minimum:
Latch Bolt: 360 Ibf(1600N)
Dead Bolt: 600 Ibf(2700N)
11.方舌鋸切試驗
所有級別:5分鐘
Dead Bolt Sawing Test:
Requirements: All Grades Five Minutes.
CYCLE TEST壽命測試
一級:1,000,000次
二級和三級:800,000次
Cycle requirements
Grade1:1,000.000
Grade 2 and 3: 800.000
FINISH TEST表面處理
1.鹽霧測試
中性鹽霧測試:
除鎖體面板和鎖片外所有有機涂層:96小時
鎖體面板和鎖片的有機涂層:24小時
無機涂層:200小時
Salt Spray Test
Neutral salt spray Test
Organic coatings on all parts except fronts and strikes 96 hours
Organic coatings on lock fronts and strikes: 24hours
Inorganic coatings: 200 hours
CASS鹽霧測試:
所有級別無機涂層:96小時
CASS Salt Spray Test
Requirements: All Grades: Inorganic coatings on all parts: 96 hours
2.濕熱度測試
除鎖體面板和鎖片外所有有機涂層:240小時
鎖體面板和鎖片有機涂層;48小時
Humidity Test:
Requirements all Grades
Organic coatings on all parts except fronts and strikes: 240 hours
Organic coatings on lock fronts and strikes: 48 hours
3.鉛筆硬度測試:
所有級別:帶有有機涂層的所有材料:4小時
Pencil Hardness Test
Requirements all grades: For all material with organic coatings: 4hours
4.平板摩擦測試:500次
Taber Test: Requirements: 500 cycles
5.汗液測試:
所有級別:帶有有機涂層的所有材料:4次。
Perspiration Test
Requirements All Grades: For all material with organic coatings: 4 cycles
6.紫外光及冷凝測試:
所有級別:所有涂層144小時
Ultra Violet Light and Condensation Test
Requirements: All Grades: all Coatings: 144 hours
MATERIAL EVALUATION TESTS
材料評估測試
球形把手變形測試:
一級:變形量不得超過10%
二級和三級:變形量不得超過25%
蓋板和鎖眼扣凹坑測試
一級:0.075in(1.9mm)
二級和三級:0.100in。(2.5mm
Knob crush Tests:
Grade 1: Deformation shall not exceed 10%
Grade 2 and 3: 25%
Rose and Escutcheon Dent Test
Requirements:
Grade 1: 0.075 in(1.9mm)
Grade 2 and 3: 0. 100in (2. 5mm