產品特點：
產品組：PLC處理器

原名：VALMET - METSO IOP303 輸入模塊 181504 3A-1

品牌：維美德 - 美卓

模型：181504

發行國家/地區：美國

PLC的特點：

1.可靠性高，抗干擾能力強

2.編程簡單易用

3.設計，安裝方便，維護工作少

4.功能齊全，用途廣泛，可實現三合一電源

5.PLC集電子控制（邏輯控制）、電氣儀表（過程控制）和電氣接線（運動控制）于一體。

6.體積小、能耗低

7.高性價比
IOP320美卓DCS卡件METSO控制器，變頻器實時控制三相異步電機的轉速，電機帶動造波器的漿液片打擊水面，電機的轉速不同，造成兩個波頭之間的波程和波峰的不同，這樣，三相異步電機不同的轉速與不同的波頭、波程、波峰相對應。

In daily use, due to the complex application environment, component damage and so on, it is possible to cause the problem of no output power after power on, so that the post-stage circuit can not work normally. So what are the common causes?

There are lightning strikes, surges or voltage spikes at the input end

Checking scheme: check whether the front-end fuse, rectifier bridge, plug-in resistor and other components of the input products are damaged, and use differential test to analyze the electrical waveform. It is recommended to be used in the environment in accordance with the EMS conditions of the technical manual. If it is needed to be used in more severe environment, it is necessary to add EMC filter and anti-surge device in the front end of the product.

Input voltage far exceeds the maximum specification value of the product

Checking scheme: check whether the product input fuse, plug-in resistor, large capacitor and other devices are intact, and test the input voltage waveform for judgment. It is recommended to adjust the input voltage, use the power supply with the appropriate voltage as the input, or replace it with a product with a higher input.