進口電動通風碟閥認準德國洛克

一、進口電動通風碟閥產品簡介：

德國《LOCKE》洛克進口電動通風碟閥驅動力矩小，啟閉靈活，操作方便。閥體上設置油密封擋圈，密封副之間無可見間隙，泄漏率小。該閥采用鋼板焊接制造，具有結構尺寸短，重量輕，安裝方便等特點。蝶板與閥體間的膨脹間隙大，能有效防止因熱漲冷縮造成的卡死現象。本閥可配備多種驅動裝置，如電動裝置、氣動裝置、蝸輪傳動裝置、手動裝置。通風蝶閥廣泛用于礦山、建材、電力、石化、治金等工業管線，對介質氣體氣控制或調節作用。

Locke electric ventilation disc valve imported from Germany has small driving torque, flexible opening and closing, and convenient operation. The valve body is provided with an oil sealing ring, and there is no visible gap between the sealing pairs, so the leakage rate is small. The valve is made of steel plate by welding. It has the advantages of short structure size, light weight and convenient installation. The expansion gap between the butterfly plate and the valve body is large, which can effectively prevent the jamming caused by the hot expansion and cold contraction. The valve can be equipped with a variety of driving devices, such as electric device, pneumatic device, worm gear drive device, manual device. Ventilation butterfly valve is widely used in industrial pipelines such as mines, building materials, electric power, petrochemicals, metallurgy, etc., which can control or regulate the medium gas.

二、進口電動通風碟閥技術參數：

Product Name: imported electric ventilation butterfly valve

Product model: Locke

Driving mode: pneumatic, electric, manual, worm gear

Connection type: wafer, flange

Applicable temperature: - 40 ℃ ~ + 800 ℃

Seal structure: soft seal, hard seal

Pressure range: 0.1-25mpa

Nominal diameter: dn50-2000

Common materials: cast iron, cast steel, 304316316l, alloy steel, etc

Technical consultation: 021-51870285

三、進口電動通風碟閥產品特點：

1設計新穎、合理、結構獨特，重量輕，啟閉迅速。

2.力矩小，操作方便，省力靈巧。

3.采用適應的材料以滿足低、中、高不同介質溫度其及腐蝕性介質等。

1. The design is novel, reasonable, unique in structure, light in weight and quick in opening and closing.

2. Small torque, convenient operation, labor-saving and dexterous.

3. Suitable materials shall be used to meet the requirements of low, medium and high medium temperature and corrosive medium

四、進口電動通風碟閥采用標準：

設計標準：DIN/T 12238-1989、DIN/T8692-1998

法蘭連接尺寸：DIN/T9115.1-2000 DIN/T9113.1-2000

結構長度：DIN/T12221-1989

壓力試驗：DIN/T 13927-1992；DIN/T9092-1999

Design standards: DIN / T 12238-1989, DIN / t8692-1998

Flange connection size: DIN / t9115.1-2000 DIN / t9113.1-2000

Structure length: DIN / t12221-1989

Pressure test: DIN / T 13927-1992; din / t9092-1999